ServerNet Cluster Manual

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster Manual—520575-002
9-23
STATUS CONNECTION, NNA Command Example
Status Detail
is the specific condition of the connection. For a list of possible values, see Status
Detail Enumeration on page 9-37
NNA Reg Data Valid
indicates whether the Node Numbering Agent (NNA) register contents shown in
the following lines are valid. Possible values are TRUE and FALSE.
Node Routing ID
shows the node number routing IDs (outbound and inbound) for both external
fabrics.
Node Number Mask
shows the contents of the node number mask registers (outbound and inbound) for
both external fabrics. The node number mask is a bit-mask indicating which bits of
the node routing ID are valid.
Mode Control
shows the contents of the mode control registers (outbound and inbound) for both
external fabrics. The mode control registers are used to select the NNA mode of
operation (pass-through, clock-checking, or conversion).
Busy Scaler
shows the contents of the busy scaler registers (outbound and inbound) for both
external fabrics. The busy scaler registers contain data used to scale the busy
symbol counting mechanism.
Ready Scaler
shows the contents of the ready scaler registers (outbound and inbound) for both
external fabrics. The ready scaler registers contain data used to scale the ready
symbol counting mechanism.
High Threshold
shows the contents of the high threshold registers (outbound and inbound) for both
external fabrics. The high threshold registers are used to set the upper limit for
comparison to the accumulator contents.
Low Threshold
shows the contents of the low threshold registers (outbound and inbound) for both
external fabrics. The low threshold registers are used to set the lower limit for
comparison to the accumulator contents.