ServerNet Cluster Manual

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster Manual—520575-002
9-28
STATUS SWITCH Command Example
Router Config CRC
indicates the status of the router configuration cyclic redundancy check (CRC).
Possible values are Status OK and Status Bad.
Firmware Images
indicates whether the firmware images stored in FLASH memory are the same.
Possible values are Images the Same and Images Different.
Config Images
indicates whether the configuration images stored in FLASH memory are the
same. Possible values are Images the Same and Images Different.
SRAM Memory Test
indicates the status of the SRAM memory test. Possible values are PASSED or
FAILED.
Flash Sector Test
indicates the status of the Flash Sector test. Possible values are PASSED or
FAILED.
SEEPROM Checksum
indicates the status of the SEEPROM checksum. Possible values are Status OK
and Status Bad.
SBUSY Error
indicates whether an SBUSY error occurred after FPGA access to router. Possible
values are No Error Detected and Error Detected.
FLASH Program Err
indicates whether a FLASH program error occurred while attempting to program
the FLASH memory. Possible values are No Error Detected and Error
Detected.
Power Supply Fan
indicates the status of the power supply fans. Possible values are Status OK
and Status Bad.
Router Self Check
indicates the status of the router configuration cyclic redundancy check (CRC).
Possible values are No Error Detected and Error Detected.