ServerNet Cluster Manual

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster Manual—520575-002
9-33
STATUS SWITCH, ROUTER Command Example
STATUS SWITCH, ROUTER Command Example
The following example shows the STATUS SWITCH command with the router option:
> SCF STATUS SWITCH $ZZSMN, ROUTER
| STATUS SWITCH X Fabric Y Fabric
|---------------------------------------------------------------------------|
| Command Status | OK | OK |
| Status Detail | No Status Detail | No Status Detail |
|--------------------|---------------------------|--------------------------|
| Router Status | ServerNet Switch | ServerNet Switch |
|--------------------|---------------------------|--------------------------|
| Router Data Valid | TRUE | TRUE |
| Inport Routing (00)| IDLE | IDLE |
| Inport Routing (01)| IDLE | EBLK, ROUTING TO (07) |
| Inport Routing (02)| IDLE | IDLE |
| Inport Routing (03)| IDLE | IDLE |
| Inport Routing (04)| NBLK, ROUTING TO (04) | IDLE |
| Inport Routing (05)| IDLE | IDLE |
| Inport Routing (06)| IDLE | IDLE |
| Inport Routing (07)| IDLE | IDLE |
| Inport Routing (08)| IDLE | IDLE |
| Inport Routing (09)| IDLE | IDLE |
| Inport Routing (10)| IDLE | IDLE |
| Inport Routing (11)| IDLE | IBLK, ROUTING TO (11) |
|--------------------|---------------------------|--------------------------|
In this example:
Command Status
is the general condition of the connection. For a list of possible values, see
Command Status Enumeration on page 9-37.
Status Detail
is the specific condition of the connection. For a list of possible values, see Status
Detail Enumeration on page 9-37
Router Data Valid
indicates whether the routing data in the following lines is valid. Possible values
are TRUE and FALSE.
Inport Routing (nn)
indicates the status of inport routing for each port, where nn is the number of the
ServerNet II switch port. Possible values are:
•
NBLK (not blocked)
•
EBLK (externally blocked)
•
IBLK (internally blocked)
•
IDLE