ServerNet Cluster Manual

SCF Error Messages
ServerNet Cluster Manual—520575-003
10-8
SANMAN (SMN) Error Messages
Recovery. It is not possible to request information from a system running an
incompatible version of SCF. Contact your service provider to resolve the version
mismatch. (See If You Have to Call Your Service Provider on page 10-12.)
SMN Error 00005
err-num
is the error number returned from a system procedure.
err-detail
is the error detail subcode associated with the system procedure error.
Cause. An unexpected error was returned from a system procedure that was called by
the external ServerNet SAN manager process ($ZZSMN). For information on file-
system errors and error detail subcodes, see the Guardian Procedure Errors and
Messages Manual.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Consult the documentation on the returned file-system error to determine
what to do next. Check the event logs for more information pertaining to the problem.
SMN Error 00006
Cause. The processor switch could not be completed. You might have specified a
nonexistent or halted processor as the primary processor.
Effect. The command is not executed. The process pair continues to execute in the
current processor(s). SCF waits for the next command.
Recovery. Verify the processors in use by the external ServerNet SAN manager
process pair.
SMN Error 00007
Cause. The subsystem could not execute the TRACE PROCESS command.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Retype the command, making sure you type it correctly.
SMN E00005 Failure in service function. error: err-num, error
detail: err-detail.
SMN E00006 Processor switch failed.
SMN E00007 Trace command error.