ServerNet Cluster Manual

ServerNet Cluster Description
ServerNet Cluster Manual—520575-003
1-27
Cluster Switch
The cluster switch can also be packaged in a 19-inch rack that is 24 to 26 (61 to 66
cm) inches deep.
ServerNet II Switch
The ServerNet II Switch is the main component of the cluster switch. The ServerNet II
Switch is a 12-port network switch used in ServerNet networks. In a ServerNet cluster,
ports 0 through 7 provide the physical junction points that enable the nodes to connect
to the cluster switches. Ports 8 through 11 are used for connections between cluster
switches on the same fabric in a split-star topology or tri-star topology.
Figure 1-15
shows the ServerNet II Switch in a switch enclosure with the door
removed.
Figure 1-14. Cluster Switch Enclosure
Note. The ServerNet I Switch product is not supported for use in a ServerNet cluster.
VST010.vsd