ServerNet/FX Adapter Configuration and Management Manual

ServerNet/FX Adapter Subsystem SCF Commands
ServerNet/FX Adapter Configuration and Management Manual—426872-002
4-24
INFO LBU Command
Example
The following example is similar to the display returned by the INFO command for the
PROCESS object:
The following descriptions explain the fields returned by the INFO PROCESS
command;
Name
identifies the name of the FOX monitor process, which must be $ZZFOX.
Primary CPU
identifies the primary processor where $ZZFOX runs. The primary processor for
$ZZFOX is the processor in which this process started its primary process. The
primary processor can be changed to the backup processor using the PRIMARY
command.
Backup CPU
identifies the backup processor to which $ZZFOX will switch if the primary
processor goes down. You can switch $ZZFOX to the backup processor by using
the PRIMARY command.
Please see the LISTDEV $ZZFOX command for device type
information.
Refer to the SCF Reference Manual for G-Series Systems for more information
about the SCF LISTDEV command.
INFO LBU Command
Use the INFO LBU command to return the current or default values for the specified
LBU object.
The INFO LBU command syntax is
SCF> INFO PROCESS $ZZFOX
FOX Info PROCESS $ZZFOX On \GATE3
Name Primary CPU Backup CPU
$ZZFOX 0 3
Please see the LISTDEV $ZZFOX command for device type information.
INFO [ /OUT file-spec/ ] LBU LBU-name [ , DETAIL ]
[ , DEFAULT ]