ServerNet/FX Adapter Configuration and Management Manual

ServerNet/FX Adapter Subsystem SCF Commands
ServerNet/FX Adapter Configuration and Management Manual—426872-002
4-25
INFO LBU Command
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LBU
is a keyword specifying that an LBU name comes next on the command line.
LBU-name
is the name of the LBU ($ZZFOX.#X or $ZZFOX.#Y) associated with the
ServerNet/FX adapter you are examining.
DETAIL
specifies that the display is to include additional detailed information about the LBU
object.
DEFAULT
displays the default values of the attributes contained in the configuration record.
Considerations
•
Selection of specific attributes to display is not supported.
•
To display dynamic information about objects (such as state information), use the
STATUS command.
Examples
The following example is similar to the display returned by the INFO LBU command
with the DEFAULT option:
SCF> INFO LBU $ZZFOX.#Y, DEFAULT
FOX Default Info LBU On \GATE3
Name *Sample Interval *Microcode Program File *Module
$ZZFOX.#Y 0:00:00.360 $SYSTEM.SYSTEM.M6742 STANDARD