ServerNet/FX Adapter Configuration and Management Manual

ServerNet/FX Adapter Configuration and Management Manual—426872-002
ix
About This Manual
This section offers a general overview of this manual and outlines this manual’s
intended audience.
Overview
The ServerNet/FX Adapter Configuration and Management Manual explains how to
configure, operate, and manage the ServerNet/Fiber eXtension (ServerNet/FX)
adapter subsystem on a NonStop S-series server. Included are detailed descriptions of
the Subsystem Control Facility (SCF) commands used with the ServerNet/FX adapter
subsystem and a quick-reference section showing the command syntax.
Who Should Use This Manual
This manual is written for anyone who is responsible for configuring, managing, or
monitoring the ServerNet/FX adapter subsystem on a NonStop S-series server.
System operators responsible for maintaining systems on FOX subnetworks may also
find this manual useful.
How This Manual Is Organized
The following table summarizes the contents of this manual:
Note. The term ServerNet/FX adapter refers to the ServerNet/FX and the ServerNet/FX 2
adapter hardware.
Note. NonStop™ S-series refers to the hardware that makes up the NonStop S-series server;
NonStop™ K-series refers to the hardware that makes up the NonStop K-series server. G-
series NonStop Kernel operating system refers to the software that runs on the NonStop S-
series server; D-series NonStop Kernel operating system refers to the software that runs on
the NonStop K-series server.
Section Title This section...
1 Overview of the
ServerNet/FX Adapter
Subsystem
Provides an overview of the ServerNet/FX adapter
subsystem.
2 Configuring the
ServerNet/FX Adapter
Subsystem
Provides configuration information for the
ServerNet/FX adapter subsystem.
3 Managing the
ServerNet/FX Adapter
Subsystem
Provides descriptions of procedures for managing the
ServerNet/FX adapter subsystem.