ServerNet/FX Adapter Configuration and Management Manual

ServerNet/FX Adapter Subsystem SCF Commands
ServerNet/FX Adapter Configuration and Management Manual—426872-002
4-36
STATS LBU Command Example
STATS LBU Command Example
The following example is similar to the display returned by the STATS LBU command
for a ServerNet/FX adapter:
The following descriptions explain the fields returned by the STATS LBU command:
System Number
identifies the system number of the node on which the ServerNet/FX adapter is
located.
Cluster Number
identifies the cluster number currently being used by the ServerNet/FX adapter.
Last Reset Time
identifies the last time statistical counters were reset. time has the form
hh:mm:ss.lll, where hh is hours, mm is minutes, ss is seconds, and lll is
milliseconds.
Controller Type
identifies the type of controller. FX2SA identifies the controller as a ServerNet/FX 2
adapter. FXSA identifies the controller as a ServerNet/FX adapter.
SCF> STATS LBU $ZZFOX.#X
FOX Stats LBU \GATE7.$ZZFOX.#X At 08 May 2001, 12:48:39.796
System Number..... 54 Last Reset Time... 11:57:48.019
Cluster Number.... 5 Controller Type... FX2SA
Controller Interface Errors
---------------------------
Chk Sum........... 0 SNET Link......... 0
SNET Pkt.......... 0 SNET Misc......... 0
SNET Aged......... 0
Packets Sent: To Left To Right To Local
------------- ------- -------- --------
From Left: N/A 203994 190142
From Right: 394517 N/A 10630
From Local: 25693 11163 N/A
S Link Over RunAway BadSrc BadDest
Errors: Runs CRC Framing Pkts Pkts Pkts
------- ---- --- ------- ------- ------ -------
Left: 0 0 0 0 0 0
Right: 0 0 0 0 0 0
S Link Under Out Aged In Q Recv Xmit
Errors: Runs Seq-ID Pkts Over Parity Parity
------- ----- ------ ---- ---- ------ ------
Left: 0 0 0 0 0 0
Right: 0 0 0 0 0 0