ServerNet/FX Adapter Configuration and Management Manual

ServerNet/FX Adapter Subsystem SCF Commands
ServerNet/FX Adapter Configuration and Management Manual—426872-002
4-41
STATUS Command
STATUS Command
STATUS is a nonsensitive command that is used to display current status and
configuration information for a specified object.
STATUS SUBNET Command
Use the STATUS SUBNET command to display current status and configuration
information about the specified SUBNET object.
The STATUS SUBNET command syntax is
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SUBNET
is a keyword specifying that an identifier for the SUBNET comes next on the
command line.
FOX-process-name
is the name of the FOX monitor process ($ZZFOX).
DETAIL
specifies that the display is to include additional detailed information about the
SUBNET object.
Consideration
To display configuration information (attributes and their values) for an object, use the
INFO command. INFO does not display dynamic information.
Examples
The following example is similar to the display returned by the STATUS SUBNET
command:
STATUS [ /OUT file-spec/ ] SUBNET FOX-process-name
[ , DETAIL]
SCF> STATUS SUBNET $ZZFOX
FOX Status SUBNET On \GATE3
Name State System# Cluster#
$ZZFOX STARTED 56 1