ServerNet/FX Adapter Configuration and Management Manual

ServerNet/FX Adapter Subsystem SCF Commands
ServerNet/FX Adapter Configuration and Management Manual—426872-002
4-48
STATUS LBU Command
Name
identifies the name of the FOX monitor process, which must be $ZZFOX.
State
identifies the summary state of the PROCESS object. The valid states are
STARTED, STOPPED, STARTING, ABORTING, DIAGNOSING, and UNKNOWN.
Refer to SCF and LBU Object States on page 4-3 for additional information.
STATUS LBU Command
Use the STATUS LBU command to display current status and configuration information
about the specified LBU object.
The STATUS LBU command syntax is
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LBU
is a keyword specifying that an LBU name comes next on the command line.
LBU-name
is the name of the LBU ($ZZFOX.#X or $ZZFOX.#Y) associated with the
ServerNet/FX adapter for which you are requesting status information.
DETAIL
specifies that the display is to include additional detailed information about the LBU
object.
Consideration
To display configuration information (attributes and their values) for an object, use the
INFO command. INFO does not display dynamic information.
STATUS [ /OUT file-spec/ ] LBU LBU-name [ , DETAIL ]