ServerNet/FX Adapter Configuration and Management Manual

Error Messages
ServerNet/FX Adapter Configuration and Management Manual—426872-002
B-3
FOX SCF Command Error Messages
FOX E00009
Cause. There is no record for the LBU ($ZZFOX.#X or $ZZFOX.#Y) associated with
the ServerNet/FX adapter in the configuration database.
Effect. The ALTER command failed. The specified LBU ($ZZFOX.#X or $ZZFOX.#Y)
associated with the ServerNet/FX adapter could not be altered.
Recovery. Issue the ADD command and then reissue the ALTER command.
FOX E00012
Cause. The Expand-over-FOX line-handler process or LBU ($ZZFOX.#X or
$ZZFOX.#Y) associated with the ServerNet/FX adapter may be down.
Effect. The path to the remote system cannot be started.
Recovery. Issue the STATUS SUBNET command to check the status of the FOX ring,
and take the necessary action to start the Expand-over-FOX line-handler process or
LBU ($ZZFOX.#X or $ZZFOX.#Y) associated with the ServerNet/FX adapter. Reissue
the START PATH command.
FOX E00013
Cause. The Expand-over-FOX line-handler process for the specified remote cluster is
not up in the local cluster.
Effect. The path to the remote system cannot be started.
Recovery. Issue the STATUS SUBNET command to check the status of the FOX ring,
and take the necessary action to start the Expand-over-FOX line-handler processes
and bind them to $ZZFOX. Reissue the START PATH command.
LBU could not be altered because there was no record defined
in the database.
System name specified is not existing on FOX RING.
Line handler for specified system not bound.