ServerNet/FX Adapter Configuration and Management Manual

Error Messages
ServerNet/FX Adapter Configuration and Management Manual—426872-002
B-4
FOX SCF Command Error Messages
FOX E00014
Cause. The Expand-over-FOX line-handler process for the local cluster is not up in
the remote system.
Effect. The path to the remote system cannot be started.
Recovery. Issue the STATUS SUBNET command to check the status of the FOX ring,
and take the necessary action to start the Expand-over-FOX line-handler processes for
the local cluster in the remote system and bind them to $ZZFOX. Reissue the START
PATH command.
FOX E00015
Cause. The local processor specified is unavailable or the fabric is down to the local
processor.
Effect. The path from the local processor cannot be started.
Recovery. Reload the processor if it is down. If the processor is up, but the fabric is
down to the local processor, start the fabric by issuing the START SERVERNET
command. Reissue the START PATH command.
FOX E00016
Cause. The PATH command issued contained an invalid parameter.
Effect. The command was not executed.
Recovery. Reissue the PATH command with valid parameters.
FOX E00017
Cause. The local LBU ($ZZFOX.#X or $ZZFOX.#Y) associated with the ServerNet/FX
adapter is not in the STARTED state.
Effect. The START PATH command was not executed.
Recovery. Start the LBU ($ZZFOX.#X or $ZZFOX.#Y) associated with the
ServerNet/FX adapter. Reissue the START PATH command.
Remote line handler down to the local system.
Path down to the local processor.
Bad parameter value.
Local LBU not in STARTED state.