ServerNet/FX Adapter Configuration and Management Manual

ServerNet/FX Adapter Configuration and Management Manual—426872-002
C-1
C
ServerNet/FX Adapter Self-test
Codes
ServerNet/FX adapter Self-test Codes are returned by the ServerNet/FX adapter
subsystem SCF START command when an attempt to start an LBU fails. The START
command is explained in Section 4, ServerNet/FX Adapter Subsystem SCF
Commands.
The self-test codes returned by a failed ServerNet/FX adapter subsystem SCF START
LBU command are:
Code Description
0x0000 No Failure
0x1110 Initial Bus Test
0x1120 Initial QRICC MBAR Test
0x1130 Initial QRICC MBAR Set
0x1140 Initial QRICC Bus Access Test
0x1150 Initial Stack Pointer Test
0x1160 Initial QRICC RAM Test 1
0x1170 Initial QRICC RAM Test 2
0x1180 Initial Stack Pointer Set
0x1190 Initial QRICC Initialization
0x1211 Initial QRICC Access Test
0x1212 Initial LP RAM Access Test
0x1213 Initial Tioga Access Test
0x1214 Initial SAR RAM Access Test
0x1215 Initial SAR Chip Access Test
0x0100 Init for Post
0x0200 LP RAM Initialization
0x0300 SAR RAM Initialization
0x0400 Init for Download
0x0500 Downloadable
0x0600 Init for Downloaded Code
0x2110 PROM Checksum Test
0x2120 PROM Byte Read Test
0x2130 PROM Write Test
0x2210 Processor Register Test