ServerNet/FX Adapter Configuration and Management Manual

ServerNet/FX Adapter Subsystem SCF Commands
ServerNet/FX Adapter Configuration and Management Manual—426872-002
4-9
ADD Command
ADD Command
The ADD command adds the configuration records for the LBU object and the
specified ServerNet/FX adapter to the system configuration database. ADD is a
sensitive command.
The ADD command syntax is
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LBU
is a keyword specifying that an LBU name comes next on the command line.
LBU-name
is the name of the LBU ($ZZFOX.#X or $ZZFOX.#Y) associated with the
ServerNet/FX adapter to be added.
attribute-spec
is a specification of an attribute and a value to be assigned to it. It is one of the
following attribute name and value combinations:
ADD [ /OUT file-spec/ ] LBU LBU-name { attribute-spec }...
WARNING. The LBU for the ServerNet/FX adapter connected to the X-ring must be named
$ZZFOX.#X. The LBU for the ServerNet/FX adapter connected to the Y-ring must be named
$ZZFOX.#Y.
Caution. The default values for the LBU attributes, with the exception of CLUSTERNUM,
should be used when adding a ServerNet/FX adapter.
, LOCATION (group, module, slot)
[ , PROGRAM file-spec ]
[ , MODULE module-name ]
[ , SAMPLEINT time ]
[ , CLUSTERNUM cluster-number ]
[ , STARTSTATE { STARTED | STOPPED } ]
[ , POWERLEFT powerlevel ]
[ , POWERRIGHT powerlevel ]