ServerNet/FX Adapter Configuration and Management Manual

ServerNet/FX Adapter Configuration and Management Manual—426872-002
vii
What’s New in This Manual
Manual Information
ServerNet/FX Adapter Configuration and Management Manual
Abstract
This manual explains how to configure, operate, and manage the ServerNet/FX
adapter subsystem on HP NonStop™ S-series servers. Included are detailed
descriptions of the Subsystem Control Facility (SCF) commands used with the
ServerNet/FX adapter subsystem and a quick-reference section showing the command
syntax. It is assumed that the reader is already familiar with the Expand subsystem. In
this manual, the term ServerNet/FX adapter refers to the ServerNet/FX and the
ServerNet/FX 2 adapter hardware.
Product Version
G07
Supported Release Version Updates (RVUs)
This manual supports G06.22 and all subsequent G-series RVUs until otherwise
indicated in a new edition.
Document History
New and Changed Information
The following new and updated information has been incorporated into this manual:
•
Instructions for using the HP Open System Management (OSM) software to
manage the ServerNet/FX adapter have been incorporated throughout the manual.
OSM is the system management tool of choice for NonStop S-series servers.
•
Some TSM procedures have been updated with newer, preferred methods.
•
Since product names are changing over time, this publication might contain both
HP and Compaq product names.
Part Number Published
426872-002 April 2004
Part Number Product Version Published
143002
G05.01 (with IPM T9050 AKL)
G06 (with IPM T9050 AKG)
October 1998
422795-001 G07 December 1999
426872-001 G07 July 2001
426872-002 G07 April 2004