SL500 (M852x) Tape Library Installation and User's Guide (G06.31+, H06.11+, J06.03+)

Library Operation

SL500 (M852x) Tape Library Installation and User’s Guide—541531-010

3-3

Powering On the Tape Library

To power on the library:

1. Close and lock the front door if the door is open.

2. Press the power switch (on the top right corner of the back of the library) to the ON

(1) position.

Powering Off the Tape Library

1. Make sure that all jobs have completed processing.

2. Make sure the tape library and tape drives are not in use.

3. Move the power on/off switch to the OFF position (0).

Caution. If you power off the tape library without performing the following procedure, you risk

possible equipment or cartridge damage or loss of data.