SL500 (M852x) Tape Library Installation and User's Guide (G06.31+, H06.11+, J06.03+)

Configuring the M8520 Tape Library for the NonStop
S-Series Server
SL500 (M852x) Tape Library Installation and User’s Guide—541531-010
5-2
PMF CRU
To add the data path:
-> SCF
-> ADD TAPE $N1523A, SENDTO STORAGE, LOCATION (1,1,55), SAC
1, DEVICEID 5, PRIMARYCPU 0, BACKUPCPU 1
-> START TAPE $N1523A
-> STATUS TAPE $N1523A, DETAIL
For complete details about the ADD and STATUS commands, including command
syntax, see the SCF Reference Manual for the Storage Subsystem.
PMF CRU
To add the control path to the server configuration database, use the SCF ADD SCSI
command. Use the SCF ADD TAPE command to add the data path. Before issuing
these commands, check that the tape drive or drives and the tape library are installed
properly.
To add the control path:
-> SCF
-> ADD SCSI $M8520, SENDTO STORAGE, PRIMARYLOCATION
(1,1,50), SCSIID 5, PRIMARYCPU 0, BACKUPCPU 1
-> START SCSI $M8520
-> INFO SCSI $M8520, DETAIL
To add the data path:
-> SCF
-> ADD TAPE $N1523A, SENDTO STORAGE, LOCATION (1,1,55),
DEVICEID 5, PRIMARYCPU 0, BACKUPCPU 1
-> START TAPE $N1523A
-> STATUS TAPE $N1523A, DETAIL
For more information on the ADD and STATUS commands, see the SCF Reference
Manual for the Storage Subsystem.