SL500 (M852x) Tape Library Installation and User's Guide (G06.31+, H06.11+, J06.03+)

SL500 (M852x) Tape Library Installation and User’s Guide—541531-010
6-1
6 Configuring the M8521/M8521A
Tape Library for the Integrity
NonStop NS-Series Server
The section covers:
Supported Connection
You can attach the M8521/M8521A tape library (control path and data path) to a Fibre
Channel ServerNet adapter (FCSA) on an Integrity NonStop NS-series server.
Adding the Control Path and Data Path
To add the control path, issue this SCF command:
SCF> ADD SCSI $device, SENDTO STORAGE, PRIMARYLOCATION
(group, module, slot), PRIMARYSAC sac-id, LUN lun-id,
PRIMARYPORT 64-bit-portname
Example:
SCF> ADD SCSI $M8521, SENDTO STORAGE, PRIMARYLOCATION
(110,2,2), PRIMARYSAC 2, LUN 0, PRIMARYPORT 1234567891234567
Supported Connection 6-1
Adding the Control Path and Data Path 6-1
Note. The control path is used to control the robot, and the data path is used to control the
tape drive or drives.
Note. The portname numbers used in this section are examples only.