SL500 (M852x) Tape Library Installation and User's Guide (G06.31+, H06.11+, J06.03+)

Specifications
SL500 (M852x) Tape Library Installation and User’s Guide—541531-010
A-5
Power Cord Numbers and Receptacles
Installing the Power Cords
If your rack has a power distribution unit (PDU), plug each power cable from the power
supply receptacle to the PDU, and then plug the PDU cable to the wall receptacle.
If your rack does not have a PDU, plug each power cable from the power supply
receptacle to the wall receptacle.
WARNING. Possible bodily harm and equipment damage: The power cord must not be
plugged in until the supply has been properly installed.