SL500 (M852x) Tape Library Installation and User's Guide (G06.31+, H06.11+, J06.03+)

Specifications
SL500 (M852x) Tape Library Installation and User’s Guide—541531-010
A-7
Power Specifications
Power Specifications
These tables list power specifications for the modules and tape drives.
Table A-5. Power for Library Without Tape Drives
Input voltage 100-240 VAC, single phase
Frequency 50/50 Hz
Maximum library power consumption 1.4 A @ 120 V
0.8 A @ 240 V
Maximum heat output 614 Btu/hr
Voltage-amperes 180 VA
Table A-6. Power for Base Unit and Two LTO Tape Drives
Two LTO Tape Drives
Input power 219 watts
Input voltage-amperes 226 voltage-amperes
Input current (100 VAC) 2.3 amperes
Input current (120 VAC) 1.9 amperes
Input current (240 VAC) 0.9 amperes
Btu/hour 748 Btu/hr
Table A-7. Power for Drive Expansion Module and Four LTO Tape Drives
Four LTO Tape Drives
Input power 288 watts
Input voltage-amperes 297 voltage-amperes
Input current (100 VAC) 3.0 amperes
Input current (120 VAC) 2.5 amperes
Input current (240 VAC) 1.2 amperes
Btu/hour 983 Btu/hr