SNAX Connection Manager (SNAX/CM) Manual

13: ZSXC-EVT-CALL-IN-FAILED
SNAX/CM Event Messages
097842 Tandem Computers Incorporated A–15
ZSXC-TKN-STATUS
reports the status of the line:
1 Not Available
2 Disconnected
3 Disconnecting
4 Allowing
5 Calling
6 Connected
ZSXC-TKN-RC
is a SNAX/CM return code. Refer to Appendix B, “SNAX/CM Messages and
Codes,” in this manual for more information.
ZSXC-TKN-FE
is a file-system error that indicates why the event occurred. Refer to the Guardian
Procedure Errors and Messages Manual for information about the error.
Conditional Tokens
ZCOM-TKN-SUBJ-SU
is an optional token that contains the name of the subdevice for which this event
occurred.
Cause. Refer to the status message, as well as the return code and file-system error message to
determine the cause.
Effect. The call-in operation has failed and the line has been disconnected or is unavailable.
Recovery. Verify that the SNAX/XF line and PU are started, and that the X25AM line and
subdevice are also started. The SNAX/CM ENABLE command retries automatically after a
short delay.