SNAX Connection Manager (SNAX/CM) Manual

15: ZSXC-EVT-DISCONNECTED
SNAX/CM Event Messages
097842 Tandem Computers Incorporated A–17
ZSXC-TKN-STATUS
reports the status of the line:
1 Not Available
2 Disconnected
3 Disconnecting
4 Allowing
5 Calling
6 Connected
ZSXC-TKN-RC
is a SNAX/CM return code. Refer to Appendix B, “SNAX/CM Messages and
Codes,” in this manual for more information.
ZSXC-TKN-FE
is a file-system error that indicates why the event occurred. Refer to the Guardian
Procedure Errors and Messages Manual for information about the error.
Conditional Tokens
ZCOM-TKN-SUBJ-SU
is an optional token that contains the name of the subdevice for which this event
occurred.
Cause. This message occurs anytime there is a disconnection; for example, a remote
device disconnects, a DISCONNECT command issued by the user completes
successfully, or the opener of the last LU issues a CONTROL 12 or CLOSE call. This
message also occurs when a SNAX/CM DISCONNECT operation is started after
receiving a call reject from the call validate or XID validate server process. Refer to the
status message, as well as any return code and file-system error message, to determine
the cause.
Effect. A SNAX/CM disconnect operation has completed successfully, or a port was
disconnected by the opener of an LU.
Recovery. Informational message only; no corrective action is needed.