SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
097842 Tandem Computers Incorporated B–7
expecting one of command list
Cause. When SNAX/CM cannot recognize commands sent by the user, it replies with
a list of commands.
Effect. For example, a user misspells the “ENABLE” command:
>)EANBLE LINE $ABC
The following message is returned to the LOG file specified:
EANBLE
^
expecting one of { APPL | APPLNAME | C | CONNECT | DISA |
DISABLE | DISC | DISCONNECT | ENA | ENABLE | EXIT |
| H | HELP | L | LOG | S | STATUS }
Recovery. Enter the command correctly. Refer to Section 3 for a complete description
of each command.
expecting one of option list
Cause. When SNAX/CM cannot recognize the options in a command, it replies with a
list of options to show the proper syntax.
Effect. For example, a user enters the following command, inadvertently using a
comma at the end:
>)ENABLE LINE $ABC,
The following message is returned to the LOG file specified:
expecting one of { PROCESS|TIMEOUT|VALCALL|VALXID }
Recovery. Enter the command correctly. Refer to Section 3 for a complete description
of the options for each command.
APPL $SSCP.# appl , APPLNAME COMMAND COMPLETED
Cause. The APPLNAME command completes successfully.
Effect. The command is processed.
Recovery. Informational message only; no corrective action is needed.