SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
B–8 097842 Tandem Computers Incorporated
APPL $SSCP.# appl , APPLNAME COMMAND FAILED,
RC = rc-code , FE = fe-error
Cause. The APPLNAME command failed.
Effect. The command is not processed.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.
LINE line-name [,PORT port-name ][,PU # puname ], command COMMAND
ACCEPTED
Cause. A command is accepted by SNAX/CM and the connection management
operation is issued to SNAX/XF.
Effect. SNAX/CM process the command and forwards it to SNAX/XF. A subsequent
log message signals either SNAX/XF rejection, a failure, or successful completion of
the SNAX/CM operation.
Recovery. Informational message only; no corrective action is needed.
LINE line-name [,PORT port-name ][,PU # puname ], command COMMAND
NOT ACCEPTED,
RC = rc-code , FE = fe-error
Cause. SNAX/CM detected a condition that precludes processing a command.
#puname is the configured name of the connected PU.
Effect. The connection management operation was not issued successfully to
SNAX/XF.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.