SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
097842 Tandem Computers Incorporated B–9
LINE STATUS for LINE line-name
SAMPLE TIME : timestamp
LINE TYPE: { SWITCHED FLOATING | PERMANENTLY SUBORDINATE }
MAXIMUM PORTS: max-count
PORTS IN USE: inuse-num
PORT port-name PUNAME: { puname | N/A }
STATUS: port-status ENABLED: {YES | NO }
.
.
PORT port-name PUNAME: { puname | N/A }
STATUS: port-status ENABLED: {YES | NO }
Cause. The STATUS LINE command completes successfully.
Effect. SNAX/CM writes this message to OUT file, where port-status can be one
of the following :
Not Available
Disconnected
Disconnecting
Allowing
Calling
Connected
Recovery. Informational message only; no corrective action is needed.
LOG to logfile-name
Cause. A user enters the LOG command.
Effect. SNAX/CM starts logging messages to logfile-name .
Recovery. Informational message only; no corrective action is needed.
LOG STOPPED
Cause. A user stops the logging activity by entering LOG.
Effect. SNAX/CM stops logging messages and closes logfile-name .
Recovery. Informational message only; no corrective action is needed.