SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
B–10 097842 Tandem Computers Incorporated
TRACE STOPPED SUCCESSFULLY
Cause. The SXCMGR trace is stopped.
Effect. The trace file closed.
Recovery. Informational message only; no corrective action is needed.
TRACE NOT STOPPED: NO TRACE ACTIVE
Cause. A TRACE STOP command was entered when no trace was active.
Effect. No trace was stopped because none had been started.
Recovery. None required.
TRACE START FAILED: GUARDIAN ERROR: fe-error , RC = rc-code
Cause. A TRACE command could not be processed.
Effect. No trace is started.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.
TRACE STARTED SUCCESSFULLY
Cause. A TRACE command was successfully processed.
Effect. A trace is active using trace-file to record trace records on disk.
Recovery. Informational message only; no corrective action is needed.
** TAKEOVER BY BACKUP PROCESS **
Cause. The primary process was stopped, there was a CPU failure, or there was a
software failure in the primary CPU.
Effect. The backup process has taken over execution of SNAX/CM.
Recovery. Informational message only; no corrective action is needed.