SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
B–12 097842 Tandem Computers Incorporated
time-date LOG (#1):
APPL $SSCP.# appl , APPLNAME COMMAND COMPLETED
Cause. The APPLNAME command successfully completes.
Effect. SNAX/CM logs this message in the LOG file.
Recovery. Informational message only; no corrective action is needed.
time-date LOG (#2):
APPL $SSCP.# appl , APPLNAME COMMAND FAILED,
RC = rc-code , FE = fe-error
Cause. The APPLNAME command failed.
Effect. The command was not processed. Further, SNAX/CM commands (other than
TRACE or LOG) will not be processed.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.
time-date LOG (#3):
LOG to logfile-name
Cause. A user enters the LOG command.
Effect. SNAX/CM starts logging the messages to logfile-name .
Recovery. Informational message only; no corrective action is needed.
time-date LOG (#4):
LOG STOPPED
Cause. A user stops the logging activity by entering LOG.
Effect. SNAX/CM stops logging messages and closes logfile-name .
Recovery. None required.