SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
097842 Tandem Computers Incorporated B–13
time-date LOG (#5):
>) < echo the command>
Cause. A user enters a command.
Effect. SNAX/CM copies the command. All commands are copied except LOG
logfile-name .
Recovery. Informational message only; no corrective action is needed.
time-date LOG (#6):
LINE line-name [, PORT port-name ][,PU #puname ],
command COMMAND ACCEPTED
Cause. A command is accepted by SNAX/CM, and the connection management
operation is issued to SNAX/XF.
Effect. A subsequent log message signals either SNAX/XF rejection, failure, or
successful completion of the SNAX/CM operation.
Recovery. Informational message only; no corrective action is needed.
time-date LOG (#7):
LINE line-name [, PORT port-name ][,PU #puname ],
command COMMAND NOT ACCEPTED,
RC = rc-code , FE = fe-error
Cause. SNAX/CM detected a condition that precludes processing a command.
Effect. The connection management operation was not issued successfully to
SNAX/XF.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.