SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
B–16 097842 Tandem Computers Incorporated
time-date LOG (#14):
LINE line-name [, PORT port-name ],
CALL-IN FAILED, STATUS: DISCONNECTED,
RC = rc-code , FE = fe-error
Cause. The call-in operation failed.
Effect. The line is disconnected.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.
time-date LOG (#15):
LINE line-name [, PORT port-name ],
DISCONNECT COMPLETED, STATUS: DISCONNECTED
Cause. A DISCONNECT command issued by the user completes successfully. This
message can also occur when a DISCONNECT operation is started by SNAX/CM after
receiving a call rejection from the call-validation or XID-validation server process.
Effect. The line is disconnected.
Recovery. Informational message only; no corrective action is needed.
time-date LOG (#16):
LINE line-name [, PORT port-name ],
DISCONNECT FAILED, STATUS: UNAVAILABLE
RC = rc-code , FE = fe-error
Cause. This message occurs when a DISCONNECT command is issued by the user
and the line has not been started or is not a CONNECTAPPL line. This message can
also occur when a DISCONNECT operation is started by SNAX/CM after receiving a
call rejection from a call-validation or XID-validation server process.
Effect. A DISCONNECT operation failed because the line is not available.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.