SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
B–18 097842 Tandem Computers Incorporated
time-date LOG (#19):
LINE line-name , PORT port-name, status-type ,
STATUS: status (UNEXPECTED),
RC = rc-code , FE = fe-error
Cause. The SNAX/XF service manager returns a status that is not expected as a
response for the current SNAX/CM operation.
Effect. SNAX/CM logs this message, where status-type is one of the following:
Call Validate
XID Validate
Call-Out Connected
Call-In Connected
Call Disconnected
Status Response
SESSION TIMEOUT
status is one of the following:
Not Available
Disconnected
Disconnecting
Allowing
Calling
Connected
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.
time-date LOG (#20):
LINE line-name , PORT port-name
INTERNAL ERROR (type: num ), UNSUPPORTED STATUS: ( num ),
RC = rc-code , FE = fe-error
Cause. The SNAX/XF service manager returns an unsupported type or status value.
The values for num are unpredictable.
Effect. SNAX/CM logs this message. The return code and file-system error number
identify the reason for the command not being accepted.
Recovery. Informational message only; no corrective action is needed.