SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
097842 Tandem Computers Incorporated B–21
time-date LOG (#27):
LINE line-name [,PORT port-name ],
XID VALIDATE FAILED, PROCESS process name ,
RC = rc-code , FE = fe-error
Cause. XID validation failed.
Effect. The effect can be one of the following:
SXCMGR fails to open the validation process.
SXCMGR fails to write to the validation process.
The validation process failed to validate the XID string within timeout limits.
The timeout value is either the default 60 seconds or a value set by the user
using a TIMEOUT call.
The validation process rejected the XID string.
The validation process returned an incorrectly formatted response.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.
time-date LOG (#28):
LINE line-name [,PORT port-name ], TACL tacl-name ,
FAILED AT NEWPROCESS,
NEWPROCESS ERROR = ( NP error, fe-error )
Cause. SNAX/CM failed to start a named TACL process with the NEWPROCESS
command.
Effect. The TACL process is not started.
Recovery. Refer to the file-system error number in the the System Procedure Calls
Reference Manual to determine the reason for the command not being accepted.
time-date LOG (#29):
LINE line-name [,PORT port-name ], TACL tacl-name ,
FAILED AT OPEN TACL PROCESS, FE = fe-error
Cause. SNAX/CM fails to open the named TACL process.
Effect. The TACL process is not started.
Recovery. Check the file-system error number to determine the reason for the
command not being accepted.