SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
B–22 097842 Tandem Computers Incorporated
time-date LOG (#30):
LINE line-name [,PORT port-name ], TACL tacl-name ,
FAILED AT WRITE TACL PROCESS,
FE = fe-error
Cause. SNAX/CM fails to write to the named TACL process.
Effect. The TACL process was stopped by SNAX/CM.
Recovery. Check the file-system error number to determine the reason for the
command not being accepted.
time-date LOG (#31):
LINE line-name [,PORT port-name ],
TACL tacl-name STARTED ON LU alias-lu-name
Cause. The user specified a TACL process with tacl-name.
Effect. SNAX/CM starts a TACL process on the first alias LU after the line is connected
by either a call-in or call-out operation. If SNAX/CM starts the named TACL process
successfully, it logs this message.
Recovery. Informational message only; no corrective action is needed.
time-date LOG (#32):
LINE line-name [,PORT port-name] ,
OPEN PROCESS process-name FAILED, FE = fe-error
Cause. After the line is connected, SNAX/CM fails to open process-name specified
by either the ENABLE or the CONNECT command.
Effect. SNAX/CM leaves the connection active and logs this message.
Recovery. Check the file-system error number to determine the reason for the
command not being accepted.