SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
B–24 097842 Tandem Computers Incorporated
time-date LOG (#36):
LINE line-name [,PORT port-name ],
CALL-IN NOT ACCEPTED,
RC = rc-code , FE = fe-error
Cause. SNAX/XF failed to accept a call-in message because of an unconfigured call
address or XID value.
Effect. The call has been disconnected.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.
time-date LOG (#37):
LINE line-name [,PORT port-name ],
INTERNAL ERROR: LINE NOT IN DATABASE
Cause. The SXCMGR line database is corrupted.
Effect. SNAX/CM abends.
Recovery. Save the abend file and contact your Tandem representative.
time-date LOG (#38):
LINE line-name [,PORT port-name ],
BUFFER SHORTAGE, FAILED TO SEND
process MESSAGE
Cause. Because the SNAX/CM message buffer is full, SNAX/CM fails to send a
message to the server, where process is one of the following servers:
PROCESS
CALL-VALIDATE
XID-VALIDATE
Effect. SNAX/CM automatically retries the message after a 3-second delay.
Recovery. Informational message only; no corrective action is needed.