SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
B–26 097842 Tandem Computers Incorporated
time-date LOG (#41):
LINE line-name [,PORT port-name ],
INTERNAL ERROR: BAD ALIAS LU NAME
Cause. The alias LU name returned by SNAX/XF to SNAX/CM is invalid.
Effect. Communication between SNAX/XF and SNAX/CM is not possible.
Recovery. Save the log file and call your Tandem representative.
time-date LOG (#42):
TRACE STOPPED SUCCESSFULLY
Cause. The SXCMGR trace is stopped.
Effect. The trace file closed.
Recovery. Informational message only; no corrective action is needed.
time-date LOG (#43):
TRACE NOT STOPPED: NO TRACE ACTIVE
Cause. A TRACE STOP command was entered when no trace was active.
Effect. No trace was stopped because none had been started.
Recovery. Informational message only; no corrective action is needed.
time-date LOG (#44):
TRACE START FAILED: GUARDIAN ERROR: fe-error
Cause. A TRACE command could not be processed.
Effect. A trace has not been started.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.