SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
B–28 097842 Tandem Computers Incorporated
time-date LOG (#48):
PU STATUS for PUNAME: pu-name
SAMPLE TIME: timestamp
PU TYPE: { SWITCHED FLOATING | PERMANENTLY SUBORDINATE }
LINE { line-name | N/A } PORT { port-name | N/A }
STATUS: pu-status
CALLSTRING: callstring
XIDSTRING: xidstring
ALIASLU: alias_lu_name
ALIASLUCNT: alias_lu_count
Cause. The STATUS PU command completes successfully.
Effect. SNAX/CM writes this message to OUT file, where port-status can be one
of the following:
Not Available
Disconnected
Disconnecting
Allowing
Calling
Connected
Recovery. Informational message only; no corrective action is needed.
Monitor Messages The following messages indicate the messages for line connections and disconnections
that are displayed on the user’s terminal.
time-date MON (#1):
LINE line-name , PORT port-name ,
CALL-OUT FAILED, STATUS: UNAVAILABLE,
RC = rc-code , FE = fe-error
Cause. A line with the same APPLNAME attribute as this SNAX/CM process failed in
a call-out operation.
Effect. The line is not available.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.