SNAX Connection Manager (SNAX/CM) Manual

Text Messages
SNAX/CM Messages
B–30 097842 Tandem Computers Incorporated
time-date MON (#5):
LINE line-name , PORT port-name ,
CALL-IN FAILED, STATUS: DISCONNECTED,
RC = rc-code , FE = fe-error
Cause. A line with the same APPLNAME attribute as this SNAX/CM process failed a
call-in operation.
Effect. The line is disconnected.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.
time-date MON (#6):
LINE line-name , PORT port-name PU #puname
CALL-IN COMPLETED, STATUS: CONNECTED,
ALIAS LU alias-lu-name , LU COUNT num
Cause. This monitor message is issued when a line with the same APPLNAME
attribute as this SNAX/CM process successfully completed a call-in operation.
Effect. #puname is the configured name of the connected PU. alias-lu-name is a
complete LU name that includes the line name.
Recovery. Informational message only; no corrective action is needed.
time-date MON (#7):
LINE line-name , PORT port-name ,
MONITOR STATUS, STATUS: { DISCONNECTED | UNAVAILABLE },
RC = rc-code , FE = fe-error
Cause. A line with the same APPLNAME attribute as this SNAX/CM process is
disconnected.
Effect. Another process is using this line.
Recovery. Check the return code and file-system error number to determine the reason
for the command not being accepted.