SNAX Connection Manager (SNAX/CM) Manual

New and Changed Information
097842 Tandem Computers Incorporated iii
The sections in this manual have been newly created or compiled from sections in pre-
existing SNAX/XF manuals, as follows:
Section Contents
“About This Manual” New.
Section 1, “Introduction” Formerly part of Section 10 in the SNAX/XF Application Programming
Manual; added information about support for Token-Ring networks.
Section 2, “Configuring
SNAX/CM”
Formerly Section 8 in the SNAX/XF Configuration and Control Manual.;
revised to include only one X.25 configuration example and add a
configuration example to support Token-Ring networks.
Section 3, “SNAX/CM
Commands”
Formerly part of Section 10 in the SNAX/XF Application Programming
Manual; revised text for the CONNECT, ENABLE, DISABLE,
DISCONNECT, and STATUS commands to support Token-Ring
networks.
Section 4, “SNAX/CM
Server Program”
Compiled from parts of Section 10 and Appendix C in the SNAX/XF
Application Programming Manual.
Appendix A, “Server
Program for SNAX/CM”
Formerly Appendix C in the SNAX/XF Application Programming Manual.
Appendix B,
“SNAX/CM Messages”
Formerly Appendix D in the SNAX/XF Application Programming
Manual.; added new return codes for Token-Ring support.
Appendix C,
“SNAX/CM Event
Messages”
Formerly Section 9 in the SNAX/XF Management Programming Manual.