SNAX Connection Manager (SNAX/CM) Manual

STATUS LINE Command
SNAX/CM Commands
3–24 097842 Tandem Computers Incorporated
S[TATUS] LINE line-name
return : (OUTFILE)
{ LINE STATUS FOR LINE line-name
SAMPLE TIME: timestamp
LINE TYPE: {SWITCHED FLOATING | PERMANENTLY SUBORDINATE }
MAXIMUM PORTS: max-count PORTS IN USE: inuse-num
PORT port-name PUNAME: { pu-name | N/A }
STATUS: pr-status ENABLED: { YES | NO }
.
.
PORT port-name PUNAME: { pu-name | N/A }
STATUS: pr-status ENABLED: { YES | NO }
| ERROR MESSAGES }
return : ($RECEIVE)
STRUCT Line^Status^Reply;
BEGIN
STRING base[ 0:-1 ];
INT Return^code;
INT Ferror;
UNSIGNED(8) max^ports;
UNSIGNED(8) inuse^ports;
STRUCT port^summary^status[ 0:inuseports - 1 ];
BEGIN
UNSIGNED(1)
Floating;-- 0 = Permanently Subordinate
-- 1 = Switched Floating
UNSIGNED(1)
Enabled; -- 0 = Not Enabled
-- 1 = Enabled
BIT FILLER(10)
UNSIGNED(4)
Status; -- Connection status of line
-- 1 = Unavailable
-- 2 = Disconnected
-- 3 = Disconnecting
-- 4 = Allowing
-- 5 = Calling
-- 6 = Connected
STRUCT PUname( VARSTRING );
STRUCT Portname( VARSTRING );
END;
STRING data[ 0:-1 ]; -- variable data for VARSTRINGs
END