SNAX Connection Manager (SNAX/CM) Manual

STATUS LINE Command
SNAX/CM Commands
097842 Tandem Computers Incorporated 3–25
LINE line-name
is the name of the SNAX/XF LINE object being displayed.
LINE TYPE: {SWITCHED FLOATING | PERMANENTLY SUBORDINATE }
displays whether the LINE is configured with switched floating PUs or with
permanently subordinated PUs for the ports assigned.
MAXIMUM PORTS: max-count
is the maximum number of PORTs that can be assigned to the displayed LINE.
This number corresponds to the MAXPUS attribute in the SCF ADD LINE
command.
PORTS IN USE: inuse-num
displays the number of ports that have been assigned to a line by any of the
following:
the ASSOCIATESUBDEV attribute in either an SCF ADD LINE/PU or SCF
ALTER LINE/PU command
a SNAX/CM ENABLE command
a SNAX/CM CONNECT command
This number also specifies the number of repetitions of PORT and PUNAME
information for the rest of the display.
PORT port-name
is a unique name used by SNAX/CM to identify and access a particular TLAM
I/O process for Token-Ring networks or an X25AM line handler subdevice for
X.25 networks. Up to 254 ports can be configured in a SYSGEN operation;
SNAX/CM controls each port independently and supports the connection of one
switched PU for each port.
PORT x25am-su-name
is the fully qualified name of the X25AM line handler subdevice, which
provides access to an X.25 network for SNAX/XF lines using the QLLC
protocol (for example, $X25AM1.#SU1). x25am-su-name is the alternative to
the ASSOCIATESUBDEV parameter that supplies the X25AM subdevice
name.
PORT $ device. # xxxxxxx
is the name of a TLAM IOP ($device), followed by a user-supplied
alphanumeric character string that follows the naming conventions for
subdevices.