SNAX Connection Manager (SNAX/CM) Manual

STATUS LINE, PORT Command
SNAX/CM Commands
097842 Tandem Computers Incorporated 3–27
STATUS LINE, PORT Command
The SNAX/CM STATUS LINE, PORT command details the connection status for a
PORT and is requested by using the following syntax:
S[TATUS] LINE line-name , PORT port-name
return : (OUTFILE)
{ PORT STATUS FOR LINE line-name , PORT port-name
SAMPLE TIME: timestamp
LINE TYPE: { SWITCHED FLOATING | PERMANENTLY SUBORDINATE }
PUNAME: { pu-name | N/A } ENABLED: { YES | NO }
STATUS: port-status
CALLSTRING: { callstring | N/A }
XIDSTRING: { xidstring | N/A }
ALIASLU: alias-lu-name ALIASLUCNT: alias-lu-count
| ERROR MESSAGES }
return : ($RECEIVE)
STRUCT Port^Status^Reply;
BEGIN
STRING base[ 0:-1 ];
INT Return^code;
INT Ferror;
INT Enabled; -- 0 = Not Enabled
-- 1 = Enabled
INT Status; -- Connection status of the PORT
-- 1 = Unavailable
-- 2 = Disconnected
-- 3 = Disconnecting
-- 4 = Allowing
-- 5 = Calling
-- 6 = Connected
STRUCT PUname( VARSTRING );
STRUCT callstring( VARSTRING );
STRUCT xidstring( VARSTRING );
STRUCT alias^lu( VARSTRING );
INT alias^lu^count;
INT line^type; -- 0 = Permanently Subordinate
-- 1 = Switched Floating
STRUCT portname( VARSTRING );
STRING data[ 0:-1 ]; -- variable data for VARSTRINGs
END