SNAX Connection Manager (SNAX/CM) Manual

STATUS LINE, PORT Command
SNAX/CM Commands
3–28 097842 Tandem Computers Incorporated
LINE line-name
is the name of the SNAX/XF LINE object to which the PORT is currently assigned.
PORT port-name
is a unique name used by SNAX/CM to identify and access a particular TLAM
I/O process for Token-Ring networks or an X25AM line handler subdevice for
X.25 networks. Up to 254 ports can be configured in a SYSGEN operation;
SNAX/CM controls each port independently and supports the connection of one
switched PU for each port.
PORT x25am-su-name
is the fully qualified name of the X25AM line handler subdevice, which
provides access to an X.25 network for SNAX/XF lines using the QLLC
protocol (for example, $X25AM1.#SU1). x25am-su-name is the alternative
to the ASSOCIATESUBDEV parameter that supplies the X25AM subdevice
name.
PORT $ device. # xxxxxxx
is the name of a TLAM IOP ($ device ), followed by a user-supplied
alphanumeric character string that follows the naming conventions for
subdevices.
LINE TYPE: {SWITCHED FLOATING | PERMANENTLY SUBORDINATE }
displays whether the LINE to which the PORT is assigned is configured with
switched floating PUs or with permanently subordinated PUs.
PUNAME: PU-name
depending on the status of the line, the value of pu-name can be an array
containing the name of the PU associated with the status results, or N/A (not
applicable).
ENABLED: { YES | NO }
displays YES if the PORT is enabled by this SNAX/CM process; otherwise,
displays NO. If the PORT was enabled by another SNAX/CM process, this
SNAX/CM displays the value as NO.