SNAX Connection Manager (SNAX/CM) Manual

STATUS LINE, PU Command
SNAX/CM Commands
3–32 097842 Tandem Computers Incorporated
PUNAME: pu-name
is an array containing the name of the PU in the form # pu-name .
PU TYPE: {SWITCHED FLOATING | PERMANENTLY SUBORDINATE }
displays whether the PU is configured as a switched floating PU or as a
permanently subordinated PU.
LINE: line-name
is the name of the SNAX/XF LINE object to which the PU is currently assigned.
PORT port-name
is a unique name used by SNAX/CM to identify and access a particular TLAM
I/O process for Token-Ring networks or an X25AM line handler subdevice for
X.25 networks. Up to 254 ports can be configured in a SYSGEN operation;
SNAX/CM controls each port independently and supports the connection of one
switched PU for each port.
PORT x25am-su-name
is the fully qualified name of the X25AM line handler subdevice, which
provides access to an X.25 network for SNAX/XF lines using the QLLC
protocol (for example, $X25AM1.#SU1). x25am-su-name is the alternative
to the ASSOCIATESUBDEV parameter that supplies the X25AM subdevice
name.
PORT $ device. # xxxxxxx
is the name of a TLAM IOP ($ device ), followed by a user-supplied
alphanumeric character string that follows the naming conventions for
subdevices.
STATUS: pu-status
is one of the following:
1 = Not Available
2 = Disconnected
3 = Disconnecting
4 = Allowing
5 = Calling
6 = Connected
CALLSTRING: { callstring | N/A }
is the configured or currently connected callstring associated with the PU. If
no callstring is configured for the PU, then the callstring received from
the X.25 network, for primary PUs, is displayed when the PU is connected.