SNAX Connection Manager (SNAX/CM) Manual

STATUS PU Command
SNAX/CM Commands
3–36 097842 Tandem Computers Incorporated
CALLSTRING: { callstring | N/A }
is the configured or currently connected callstring associated with the PU. If
no callstring is configured for the PU, the callstring received from the
X.25 network, for primary PUs, is displayed when the PU is connected.
XIDSTRING: { xidstring | N/A }
is the configured or currently connected xidstring associated with the PU. If no
xidstring is configured for the PU, the xidstring received from the X.25
network, if any, is displayed when the PU is connected.
ALIASLU: alias-lu-name
If the PU status is “connected,” alias-lu-name is displayed as generated by
SNAX/XF. This name is in the form $ line .# axnnnn1 for the LUs configured
under the connected PU.
ALIASLUCNT: alias-lu-count
if alias-lu-name is returned, displays the number of LUs connected.
return : (OUTFILE)
if received from the IN file, specifies the text message to be returned to the OUT
file. See Appendix B for detailed descriptions of error messages.
return : ($RECEIVE)
if received from the $RECEIVE file, returns a structured buffer defined above. See
Appendix B for detailed descriptions of return codes.
Using the STATUS PU Command. The following example shows how the SNAX/CM
STATUS PU command is used. In this example, the STATUS command is used to ask
for the status of a specific switched floating PU that is currently subordinated to a line:
-> STATUS PU #PU1
The returned information is as follows:
PU STATUS for PUNAME: #PU2
Sample Time : 02/29/1992 11:11:11.11
PU TYPE: SWITCHED FLOATING
LINE $SNAP1 PORT $X25AM1.#SU1
STATUS: Connected
CALLSTRING: 123456789
XIDSTRING: FFFFFFFF
ALIASLU: $SNAP1.#A100321 ALIASLUCNT: 5