SNAX Connection Manager (SNAX/CM) Manual

10: ZSXC-EVT-BUFFER-ERROR
SNAX/CM Event Messages
A–10 097842 Tandem Computers Incorporated
10: ZSXC-EVT-BUFFER-ERROR
There is insufficient buffer space to continue processing. SNAX/CM issues this and
abends. This event message is equivalent to SNAX/CM log message 10.
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSXC-EVT-BUFFER-ERROR
Conditional Tokens
ZCOM-TKN-SUBJ-LINE token-type ZSPI-TYP-STRING
ZCOM-TKN-SUBJ-SU token-type ZSPI-TYP-STRING
Event-Message Text
SXCMGR BUFFER FAILURE line-name [, PORT port-name ,]
Message Parameter Descriptions
line-name equals ZCOM-TKN-SUBJ-LINE.
port-name equals ZCOM-TKN-SUBJ-SU.
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER
is the event number. Its value is ZSXC-EVT-BUFFER-ERROR.
Conditional Tokens
ZCOM-TKN-SUBJ-LINE
is the fully qualified name of the line-handler process for the line on which the
event occurred.
ZCOM-TKN-SUBJ-SU
is an optional token that contains the name of the subdevice for which the event
occurred.
Cause. SNAX/CM was unable to get sufficient buffer space to continue processing.
Effect. SNAX/CM issues this message and abends.
Recovery. Verify that the CONNECTAPPL system generation line attribute has been
added using the SCF ADD APPL command and that it is the correct type. Redistribute
the workload using the SNAX/CM ENABLE and CONNECT commands to support
additional connections.
Also ensure that compatible versions of SNAX/XF and SNAX/CM are being used. If
the problem still exists, gather the following information as appropriate and contact
your Tandem representative: