SNAX Creator-2 Configuration and Control Manual

STOP SU Command
SCF Commands for SNAX Creator-2
4–52 117143 SNAX Creator-2 Configuration and Control Manual
STOP SU Command The STOP SU command terminates the activity of an SU object in an orderly manner.
Upon completion of this command, the configured objects are in a STOPPED state.
STOP SU is a sensitive command.
STOP SU command syntax is as follows:
STOP [ /OUT file-spec / ] SU manager-name.object-name
[ , SEL [ NOT ] state ]
OUT
causes any SCF output generated for this command to be directed to the file
file-spec ; it is described in the Subsystem Control Facility (SCF) Reference Manual.
manager-name
is described in Section 3, “Objects for SNAX Creator-2.”
object-name
is an SU object name, as described in Section 3, “Objects for SNAX Creator-2.”
SEL
is described in the Subsystem Control Facility (SCF) Reference Manual.
state
is an SU object state, as described in Section 3, “Objects for SNAX Creator-2.”
Considerations
The SUB, ORDERLY, and FORCED parameters are not supported.
All connections subordinate to the SU object are stopped and closed when all
pending traffic ceases.