SNAX Creator-2 Configuration and Control Manual

About This Manual
117143 SNAX Creator-2 Configuration and Control Manual xi
This manual explains how to perform configuration and management tasks and
describes the Subsystem Control Facility (SCF) interactive interface that enables you to
configure, control, and inquire about a SNAX Creator-2 subsystem.
Who Should Read This
Manual
The intended reader of this manual is a person performing configuration and
management of the SNAX Creator-2 subsystem. The reader is expected to be familiar
with IBM Systems Network Architecture (SNA), Tandem system architecture, and
basic SCF operations.
Organization of
This Manual
This manual contains the following sections and appendixes:
Section 1, “Introduction to SCF for SNAX Creator-2,” contains overview
information about using SCF to manage SNAX Creator-2.
Section 2, “Startup and Configuration of SNAX Creator-2,” contains information
about configuring and controlling SNAX Creator-2.
Section 3, “Objects for SNAX Creator-2,” presents the conceptual framework for
the SCF interface to the SNAX Creator-2 subsystem by describing the objects for
the subsystem.
Section 4, “SCF Commands for SNAX Creator-2,” provides brief descriptions of
the SCF commands that are supported by SNAX Creator-2.
Section 5, “Attributes and Built-in Functions for SNAX Creator-2,” provides brief
descriptions of the object attributes specific to SNAX Creator-2.
Appendix A, “SCF Command Syntax Summary for SNAX Creator-2,” provides a
quick reference of SCF command syntax.
Appendix B, “SCF Error Messages for SNAX Creator-2,” provides a reference to
the SCF error messages that can be generated for SNAX Creator-2.
Appendix C, “Configuration Examples,” provides examples of how to achieve
specific objectives, such as load-balancing.
Appendix D, “Configuring SNAX Creator-2 With SNAX/APN,” provides
comprehensive examples of both the SNAX/APN and SNAX Creator-2
configurations, including correspondences.
Appendix E, “Configuring SNAX Creator-2 With SNAX/XF,” provides
comprehensive examples of both the SNAX/XF and SNAX Creator-2
configurations, including correspondences. This appendix includes how to
migrate from using the old Creator process (T6954) to SNAX Creator-2 without
change to an existing SNAX/XF configuration.
Related Manuals SNAX Creator-2 can be used with SNAX/APN or SNAX/XF. For configuration and
management information about SNAX/APN and information about the extended
logon facility (XLF), see the following manual:
SNAX/APN Configuration and Control Manual