SNAX Creator-2 Configuration and Control Manual

PRINTER
Attributes and Built-in Functions for SNAX Creator-2
117143 SNAX Creator-2 Configuration and Control Manual 5–5
in the access method configuration (for SNAX/XF and SNAX/APN, this is in the ADD
APPL for the SNAX Creator-2 SU).
This attribute is optional.
PATHMON
Default: None
Value: Set of process names (attribute values are filtered for running processes)
Object: APPL
This attribute is used only if the METHOD attribute has the value PATHWAY. It
specifies a set of PATHMON processes from which SNAX Creator-2 selects one. If the
Pathway application resides on a remote node, you must specify the PATHMON
process on that remote node (qualified by the system name).
This attribute is mandatory at logon.
PLUNAME
Default: PLU name provided by the access method
Value: Name 1 to 8 characters long
Object: SU
This attribute specifies the second portion of the APPL name (following the C-).
If PLUNAME is specified, SNAX Creator-2 searches for an APPL name derived from
its value.
If PLUNAME is not specified, SNAX Creator-2 searches for an APPL name derived
from the PLU name provided by the access method.
This attribute is optional.
PRIMARYCPU
Default: The value of the built-in function [#CPUA]
Value: 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15
Object: APPL
This attribute is used only if the METHOD attribute has the value TACL. It specifies
the primary CPU for a TACL process.
This attribute is optional. If it is not specified, the value of the built-in function
[#CPUA] is used.
PRINTER
Default: None
Value: File name
Object: APPL
This attribute is used only if the METHOD attribute has the value PATHWAY. It
specifies the name of the printer that is used with the SCREEN COBOL
PRINT-SCREEN function.