SNAX Creator-2 Configuration and Control Manual

Your Comments Invited
About This Manual
xii 117143 SNAX Creator-2 Configuration and Control Manual
SNAX Creator-2 is used with SNAX/APN and the Tandem Logon Manager for IBM
Systems (ILOGMGR) to implement the extended logon facility (XLF). For more
information about ILOGMGR, see the following manual:
Tandem Logon Manager for IBM Systems (ILOGMGR) Manual
For configuration and management information about SNAX/XF, see the following
manuals:
SNAX/XF Configuration and Control Manual
SNAX/XF LU Network Services Manual
The following manuals contain general information about SCF, the Event Management
Service (EMS), and management of subsystems. You should be familiar with the
material covered in these manuals:
Introduction to Distributed Systems Management (DSM)
Subsystem Control Facility (SCF) Reference Manual
Operator Messages Manual
EMS Manual
The following manuals contain information about the Pathway environment. Each of
these manuals includes a guide to other manuals about other aspects of the Pathway
environment:
NonStop TS/MP and Pathway Management Reference Manual
NonStop TS/MP and Pathway System Management Guide
The following manuals contain information about availability:
Availability Guide for Change Management
Availability Guide for Problem Management
Your Comments
Invited
After using this manual, please take a moment to send us your comments. You can do
this by returning a Reader Comment Card or by sending an Internet mail message.
A Reader Comment Card is located at the back of printed manuals and as a separate
file on the Tandem CD Read disc. You can either FAX or mail the card to us. The FAX
number and mailing address are provided on the card.
Also provided on the Reader Comment Card is an Internet mail address. When you
send an Internet mail message to us, we immediately acknowledge receipt of your
message. A detailed response to your message is sent as soon as possible. Be sure to
include your name, company name, address, and phone number in your message. If
your comments are specific to a particular manual, also include the part number and
title of the manual.
Many of the improvements you see in Tandem manuals are a result of suggestions
from our customers. Please take this opportunity to help us improve future manuals.