SNAX Creator-2 Configuration and Control Manual

DELETE Command
SCF Commands for SNAX Creator-2
117143 SNAX Creator-2 Configuration and Control Manual 4–17
DELETE Command The DELETE command removes objects from the subsystem. It is a sensitive
command.
DELETE command syntax is as follows:
DELETE [ /OUT file-spec / ]
{ APPL manager-name.object-name }
{ ENTRY manager-name.object-name }
{ SU manager-name.object-name }
{ SUBSYS manager-name }
[ , SEL [ NOT ] state ]
[ , SUB [ { ALL | NONE | ONLY | subtype } ] ]
OUT
causes any SCF output generated for this command to be directed to the file
file-spec ; it is described in the Subsystem Control Facility (SCF) Reference Manual.
manager-name
is described in Section 3, “Objects for SNAX Creator-2.”
object-name
is an APPL , ENTRY, or SU object name, as described in Section 3, “Objects for
SNAX Creator-2.”
SEL
is described in the Subsystem Control Facility (SCF) Reference Manual.
state
is an APPL , ENTRY, SU, or SUBSYS object state, as described in Section 3,
“Objects for SNAX Creator-2.”
SUB
is described in the Subsystem Control Facility (SCF) Reference Manual.
subtype
is an object type subordinate to the object named in the command, as described in
Section 3, “Objects for SNAX Creator-2.”